Choose any of the urns below to create your fountain.

The reservoir kit, pump and your choice of urns comprise all the components needed to build a complete recirculating water fountain. Our urns are handmade and high fired in wood burning kilns. No two are exactly alike. These fountains can be used for indoor or outdoor applications.

Simply decide upon the venue for your fountain. If it is outdoors you may want to dig out a cavity in which to place the reservoir and assure a stable, level surface. Set the reservoir into its place. Center the ceramic support in the reservoir. Screw the plastic adaptor fitting onto the bottom of the urn. Two people can then easily place the urn on top of the ceramic support, being careful not to damage the plumbing. Now it's time to connect the push on fittings to the bottom of the urn and also to the pump. If you use our pump, it has suction feet allowing it to adhere to the wall of the reservoir. The valve is used to regulate the flow of water. Adjust the valve to change the sound of the falling water and determine the area for water dispersion.

Place one of the flat covers over the reservoir. Then place the pump cord through the provided notch of the second cover as you also place this on top. Finally place some river rocks or your choice of materials on top of the reservoir for your desired effect. Enjoy!

View the water fountains running, click here. (*Recommended for broadband users only)

	Capella Item #976 14W 31HT
	Honeycomb Item #971 23W 30HT
	Tucana Item #970 23W 32HT
	Orion Item #973 20W 31HT
	Apus Item #975 26W 32HT

For a full listing see our catalog.